Smart Shoe™ Technology to Measure Railway Vehicles' Wheel and Disc Brake Forces
Unveiling intelligent solutions for complex railway measurement challenges. Accurate, repeatable measurements for railway vehicles' safety-critical parameters.
Our ApplicationsConquering complexity,
we bring Operational Efficiency with our Intelligent Technology Solutions and WiFi-enabled communications
We Provide Augmented Test Accuracy and reduced SetUp Duration
We’re proud to stand at the cutting edge of brake force measurement technology innovation that addresses our clients' most imperative challenges in designing, building, and operating their railway vehicles.
Always striving for more, we make it our mission to provide comprehensive brake force measurement for our clients through the implementation of our exclusive Smart Shoe™ Technology.
Contact UsAbout Us
Romell Inc. has been selling brake force products since 2001
Giving us a unique opportunity to build experience and knowledge within our industry. Making sure our partners and clients have what they need to move forward is what we do best, and it's why we've spent years in and outside the laboratory testing each system to ensure only the most accurate and robust data and measurement products available.
Romell Inc. understands the needs of our partners, thus we've integrated modern technology into our measurement to offer a more seamless and responsive experience.
Know MoreDon't settle for less when it comes to your next railway project
Let Romell Inc. and Smart Shoe™ Technology lead the way. Smart Shoe™ Technology is an ideal measurement system for railway vehicles such as freight cars, locomotives, passenger cars, high-speed passenger cars, metro and transit cars, rail equipment and more.
Smart Shoe™ installation video
What Our Clients Say
That system was amazing. So much easier to use and
set up..
Data storage and retrieval were easy and intuitive.
Data storage and retrieval were easy and intuitive.
Manufacturing Engineer
Texana Tank Car Mfg., Ltd.
This has
been the first opportunity to use Brake Force Tester S/N 8SS07 to test a car. I
am very pleased to report that all load cells worked with no issues. Thank you
for the time and effort it took to replace the cables and alleviate the issue
of the non-reading load cell.
Manager
UTLX Co.
I used the Smart Shoe™ R-145-WH and
R-145-D Wifi equipment 2 weeks ago testing some car and loco equipment for PTC.
First, I wanted to let you know how much of an improvement it was to use the
new Wifi equipment. The setup time was much faster without having the hassle of
getting sensors tangled and twisted in the attached sensor wiring of our
previous testers. Additionally, the use of 8 sensors cut my test time in half!
It was great being able to instrument the entire car/loco just one time and not
having to go between the A and B truck. The tablet was really the icing on the
cake. While testing the locomotive, I was able to setup everything and run all
my brake tests from the cab of the locomotive. There was no signaling, or communication
needed between the guy on the ground and me in the cab. I simply ran the entire
shoe force test from the cab of the loco. Same case for testing the car; I was
able to test the entire car from the SCT device and watch the live stream of
data from the tablet. And using the tablet with a touch screen to input the
test notes and recording data was much better than the small computer screen
and stylus on the old equipment. These new test devices were a huge
improvement! Great job!
Senior Mechanical Engineer
Mechanical Rolling
Stock Engineering
AMTRAK